On today’s episode of Extreme Built-In Appliances …
good idea, no downsides
Submitted 1 day ago by UnCollaredCarrot@piefed.zip to [deleted]
https://media.piefed.zip/posts/ZU/lr/ZUlroPnxgnoIUly.jpg
Comments
finallymadeanaccount@lemmy.world 2 hours ago
FreeBeard@slrpnk.net 8 hours ago
Nobody mentioned yet how fucking loud this will be. Strong vibrations coupled to a resonating body like** YOUR HOUSE** sounds like a bad experience.
lightnsfw@reddthat.com 9 hours ago
How’s your wife going to use it to jerk off now?
bridgeburner@lemmy.world 7 hours ago
Do that in an US-American paper house and watch it crumble lol
cley_faye@lemmy.world 11 hours ago
It won’t move relative to the wall.
Semi_Hemi_Demigod@lemmy.world 1 day ago
Fun fact: Clothes washers actually do have concrete weights in them to help damper spin oscillations:
Source: The Secret Life of Machines
papalonian@lemmy.world 1 day ago
I moved recently and had some small filing cabinets that needed to be moved downstairs (and subsequently back upstairs). I was amazed at how heavy the near-empty, cheap sheet metal cabinets were, until I saw the giant paver stones bolted to the inside back wall to give them support when the drawers are open.
Semi_Hemi_Demigod@lemmy.world 1 day ago
I guarantee the salespeople said the weight meant they were built well
TrousersMcPants@lemmy.world 23 hours ago
As someone who moves filing cabinets a fair bit for my job, this is actually super common, I see it all the time
VonReposti@feddit.dk 16 hours ago
Some higher end models have a cast iron weights instead.
musubibreakfast@lemmy.world 16 hours ago
Some cheaper models have two little people from New Jersey in them.
dual_sport_dork@lemmy.world 1 day ago
Modern ranges/stoves do this also, and some of them even have the concrete blocks bolted to the outside where you can see them. Albeit on the back.
Catoblepas@lemmy.blahaj.zone 1 day ago
My dishwasher does as well, it’s a model on wheels and for the first couple of weeks it left flakes of concrete everywhere when I moved it.
Squirrelsdrivemenuts@lemmy.world 16 hours ago
Why don’t they just have a basin that fills with water? Would be much easier for moving.
Valmond@lemmy.dbzer0.com 20 hours ago
Those who don’t know; have never moved.
skisnow@lemmy.ca 11 hours ago
Could go either way I reckon, acoustically coupling the walls of your house to a big spinning drum
SaveTheTuaHawk@lemmy.ca 11 hours ago
wife is once again dissappointed.
sundray@lemmus.org 1 day ago
Edger Allen Poe’s the Cask of Fabric Softener
Remember_the_tooth@lemmy.world 23 hours ago
Quote the Samsung, “Error: Door.”
WoodScientist@lemmy.world 22 hours ago
There has to be some hippy out there selling organic fabric softener in a wooden cask.
Passerby6497@lemmy.world 16 hours ago
The hippie probably doesn’t use fabric softener. That shit isn’t worth it in my opinion, and just makes things softer at the expense of lifetime and performance. Things like towels lose absorbency when you use it, workout clothes don’t wick sweat off your skin as easy, it can demonish the flame retardant property of kid clothes, and it can make it easier for mold/mildew to grow in your machine.
If you’re using it for static/smells, just use dryer balls and some essential oil. I think they’re also pretty good at softening your clothes.
rem26_art@fedia.io 1 day ago
"No need to service it. All parts last the lifetime of the machine" (the lifetime is 6 months)
altphoto@lemmy.today 22 hours ago
They’ll come out with flat washing machines next.
HikingVet@lemmy.ca 16 hours ago
I thought we had thise already.
AnnaFrankfurter@lemmy.ml 9 hours ago
Balancing a centrifuge.
ThePantser@sh.itjust.works 1 day ago
Built-in washing machine.
sorter_plainview@lemmy.today 1 day ago
What are the issues by doing something similar? Let us say instead of concreate I have a custom bracket that will arrest any movement. What are the issues it can cause?
Allero@lemmy.today 23 hours ago
You’ll likely kill the motor or drum elements. In essence, your washing machine is an unbalanced centrifuge that tries to release the energy differential by moving the entire thing.
If you restrict its movement, the whole load and the respective mechanical stress will fall on parts moving and holding the drum. They are not meant to hold that kind of load and will break quickly.
dogs0n@sh.itjust.works 1 day ago
Your house will blow up and explode
WhoIzDisIz@lemmy.today 1 day ago
No, it will implode into a singularity. You’re thinking of a dryer.
lyralycan@sh.itjust.works 23 hours ago
The forces that would normally just affect the washing machine and the floor it’s on will now affect the bracketed surface. Depending on the type of construction the violent vibrations will start to decay that section of the building. Brick will eventually crack and crumble, wood may not break but it’ll be louder. The problem is mainly that with this setup there’s no extra dampener, so the best solution is to buy a washing machine with better dampening system. FWIW my machine suspends its drum with two shock absorbers on the bottom and two suspension springs at the top, and has a central motor instead of an offset one with a belt.
WoodScientist@lemmy.world 22 hours ago
I propose the most practical option possible:
Simply isolate the washing machine completely from the building. Levitate it entirely off the ground, suspended in the air via a massive toroidal superconducting electromagnet, 3 meters in diameter, cooled by liquid helium. (Which will need to be regularly topped off. It tends to slowly leak through solid walls.)
The noise would be greatly reduced. As the machine thrashes about, it will do little but disturb the air around it. Little noise will be generated, except from the sound of the machine’s own parts acting against each other.
Though, if you really wanted to optimize this for this setup, a different design is in order? Perhaps a non-standard design would better handle internal vibrational damping? Have you considered calling local stores and asking if they have any spherical washing machines in stock?
OwOarchist@pawb.social 23 hours ago
Vibrations don’t just vanish when they hit solid concrete.
Your entire wall will vibrate, which will distribute the sound through the house and make the machine seem much louder than it normally is. Potentially, this might eventually result in cracks in the concrete wall: concrete is very strong in compression, but has low tensile strength, low ability to resist pulling forces … and every vibration is a quick succession of compression and tension.
Shellofbiomatter@lemmus.org 1 day ago
Maintenance is probably the first thing that comes to mind and custom bracket is just over engineering a simple solution like a hole or just leaving it standing in the same place where the bracket was supposed to be.
Washing machines are already designed to minimize all the movement it causes. It just isn’t worth the effort to do anything else to it.
OwOarchist@pawb.social 23 hours ago
Washing machines are already designed to minimize all the movement it causes. It just isn’t worth the effort to do anything else to it.
Well, if your machine is too noisy for your liking, you could…
-
Make sure it isn’t touching any walls or any other objects, especially at the side or back of the machine.
-
Place it on a rubber mat or thick carpet to absorb some of the vibrations.
-
Put noise-absorbing foam panels on the walls and/or ceiling of your laundry room.
Doing any or all of those may make it significantly quieter, especially when listening to it from outside the room.
-
empireOfLove2@lemmy.dbzer0.com 1 day ago
except it’s a Samsung so it’s about 6 months away from needing a $400 motherboard or other insanely stupid electronic component that is worth more than the machine itself.
lobut@lemmy.ca 22 hours ago
When I got this house, all my appliances were Samsung. It’s been five years. None of my appliances are Samsung.
OS2Warp@lemmy.zip 11 hours ago
My rule is if you’ve ever made a TV or cell phone I’ll NEVER buy your appliance.
TigerAce@lemmy.dbzer0.com 21 hours ago
Well it easy to just repair your own washing machine yours-… Oh it’s Samsung, never mind. Overly complex electronics and digital control made to not be fixable and break just after warrenty. But on the upside, it has ads and doesn’t work without an app on your phone!
Remember the time when a washing machine actually was made to wash clothes, for over 20 years? Or a fridge, which was designed to keep your products cool, for over 20 years? Without a monthly subscription, no ads, no updates, no popups, no ai which doesn’t work, no phone connectivity required, etc. And all for a reasonable price, as it wasn’t an overly complex computer. 120 euros for a washing machine which lasts for over 20 years, or a 650 euros for one that lasts 3 years and 2 months.
We’re not buying appliences that make our life easy anymore. We’re just buying devices designed to make companies and billionaires as rich as possible.
Lemmyoutofhere@lemmy.ca 16 hours ago
All appliances used to be really expensive, now only good ones are. Stop buying crap and they will last 20 years.
unitedwithme@lemmy.today 1 day ago
For us it was the $180 concrete counterbalance weight that broke, dented the front panel, and broke the drain tube clean out up front. Hunk of junk.
WoodScientist@lemmy.world 22 hours ago
That’s why you prepare a hallway with like 20 of these alcoves. When one machine breaks, you simply pump it full of cement and plaster it over. It just becomes part of the wall. It remains there, entombed forever, like some latter-day washing machine Pompeii. Or maybe you don’t plaster over them at all. Maybe you proudly display them. “These are the washing machines of my ancestors…”
FauxPseudo@lemmy.world 22 hours ago
My wife was a huge Samsung fan. When it came time to get a washer I found a ding and dent option at a habitat for humanity ReStore. It likes to get unbalanced but it’s still kicking after 8 years. I didn’t expect it to last this long. But I know for a fact the next time we get one my wife will not care if it’s Samsung or not.
rainwall@piefed.social 12 hours ago
I had this same issue with a Samsung dryer years ago. Weird as hell rubbing noise but as far as I could tell no actual mechanical issue. Realized that lifting the front end made it stop immediately. Tried adjusting the feet but that didn’t resolve if consistently.
I shoved a 2in high piece of wood under the front lip and the machine has never made the noise again. Still going strong.
Valmond@lemmy.dbzer0.com 20 hours ago
Costs
It’s probably not worth it.
Frozengyro@lemmy.world 1 day ago
That’s … that’s the joke