how to build a loopback device
Submitted 1 month ago by gandalf_der_13te@feddit.org to [deleted]
Comments
M137@lemmy.today 1 month ago
kryptonianCodeMonkey@lemmy.world 1 month ago
IT: “Did you verify that your data cable is connected to the outlet in the wall?”
Client: “Of course I did. I’m not an idiot!”
Brkdncr@lemmy.world 1 month ago
My eye is twitching.
Lost_My_Mind@lemmy.world 1 month ago
Careful. Amazon could sue you!
Treczoks@lemmy.world 1 month ago
We had such a case in the company, way back before switches got smart enought to deal with this.
Our IT department was not exactly happy…
Kn1ghtDigital@lemmy.zip 1 month ago
… What does this do to a network anyway? Nothing, right?
marcos@lemmy.world 1 month ago
If you remember to use a cross-over cable, it ruins the address resolution protocol and stops everything from working.
Modern routers have code exclusively to detect it and disable the ports.
Thunderwolf@lemmy.world 1 month ago
And if you don’t have spanning tree enabled, this could be a big problem
haywire7@lemmy.world 1 month ago
Network loops are real. Network loops are common. Network loops are the leading cause of people screaming “for fucks sake!” After spending far too long looking for other solutions to why the network goes down intermittently.
hperrin@lemmy.ca 1 month ago
If you have a good switch or router, correct. If you have cheap consumer level crap, it could potentially cause a lot of issues until you unplug it. It wholly depends what’s on the other end of those jacks.
TipRing@lemmy.world 1 month ago
If you did it at my office, nothing because typically only one of those jacks is cross connected (the other is a spare wire) also our switches use spanning tree. Most network loops I’ve seen have been caused by logical configuration errors.
frank@sopuli.xyz 1 month ago
Yeah, gotta keep those plugged. It’s just a service for fully draining/refilling the network for maintenance
flop_leash_973@lemmy.world 1 month ago
flango@lemmy.eco.br 1 month ago
Powaaahhh
LillyPip@lemmy.ca 1 month ago
Is this a call for help?
starchylemming@lemmy.world 1 month ago
Do this at work to increase productivity!
skankhunt42@lemmy.ca 1 month ago
I did this in college (2011) once… Friday class was going over stuff I already understood and got bored, found a cable and played with it for a few min before plugging in both ends to the wall. Monday morning get to class and it’s cancelled because the network is down. I then understood what I did and unplugged the cable.
Haven’t told anyone until today.
starchylemming@lemmy.world 1 month ago
Your poor school it guy went through something
neidu4@piefed.social 1 month ago
When the guy in the server room ran out of patch cables
oyzmo@lemmy.world 1 month ago
hehe, that gives IT the painfull task of manual searching 😂
RememberTheApollo_@lemmy.world 1 month ago
127.0.0.1
Bakkoda@lemmy.world 1 month ago
Internets require a zero static loop. Gotta keep the bits flowing out they degrade.
MehBlah@lemmy.world 1 month ago
Test your spanning tree.
Sir_Premiumhengst@lemmy.world 1 month ago
Token circle
bhamlin@lemmy.world 1 month ago
And with enough experience can evolve into token sphere.
TootSweet@lemmy.world 1 month ago
You plugged those into the wrong ports. You’re supposed to plug both ends into here:
220v power outlet
Don’t worry if you have to use a lot of force to get it in there. That’s just to make sure it doesn’t come out if you trip over it.
teslekova@lemmy.ml 1 month ago
What the fuck country uses that socket?
Junkers_Klunker@feddit.dk 1 month ago
NEMA is an American standard used in North America and parts of Asia. NEMA 10-30 specifically is a dual voltage socket that delivers 120V or 240V depending on whether you use L1/Neutral or L1/L2. It isn’t used anymore though as it isn’t grounded.