CherryTree Introduces Star Trek: Deep Space Nine-Inspired "IYKYK" Raktajino Mug

Comments

• SatyrSack@feddit.org ⁨2⁩ ⁨months⁩ ago

  Is this shape not rather impractical? It may be more difficult to accidentally knock over, but you would also need to tip it back to a somewhat extreme angle in order to get everything out of it.

  source

  • ValueSubtracted@startrek.website ⁨2⁩ ⁨months⁩ ago

    I think the design was originally intended for use on boats, and other places where tipping is a likely occurrence.

    source

    • darkpanda@lemmy.ca ⁨2⁩ ⁨months⁩ ago

      I think it’s for any motor vehicle where tipping is likely. See this page with all sorts of pictures and examples, including old packaging.

      sprudge.com/no-spill-mug-feltman-langer-160969.ht…

      source
  • Corgana@startrek.website ⁨2⁩ ⁨months⁩ ago

    It’s very practical if you’re somewhere without inertial dampeners.

    source

    • bishbosh@lemm.ee ⁨2⁩ ⁨months⁩ ago

      Does earth have inertial dampeners??

      source

      • -> View More Comments
  • stargazingpenguin@lemmy.zip ⁨2⁩ ⁨months⁩ ago

    Is the wider section actually hollow? I was imagining they might just have a normal round shape inside due to it being more difficult to mold.

    source
  • ackbar@lemmy.ca ⁨2⁩ ⁨months⁩ ago

    No way am I able to clean that without a bottle brush. I’ll sick to a standard mug.

    source

    • T156@lemmy.world ⁨2⁩ ⁨months⁩ ago

      This seems like the kind of thing you’d need either a dishwasher, or one of those cafe rinsers that spray water up into the thing to clean.

      You’d never be able to get your hand into the corners.

      source

      • -> View More Comments
• mercano@lemmy.world ⁨2⁩ ⁨months⁩ ago

  DS9 had at least two different kinds of flared mugs: the HotJo, which is still sold for $30, and the Feltman Langer, which is no longer sold, but this CherryTree is recreating.

  source
• distantsounds@lemmy.world ⁨2⁩ ⁨months⁩ ago

  I would not be able to properly control the flow rate of hot beverage directed at face with that design. Still love that look

  source
• TargaryenTKE@lemmy.world ⁨2⁩ ⁨months⁩ ago

  Don’t get me wrong, they get points for the Coolness Factor, but am I the only one who thinks this is genuinely a terrible design for a mug? Like, I have a hard enough time getting the coffee rings out of my cylindrical mugs, I don’t even want to imagine the finger cramps I’d get trying to clean this one (or worse, the mold that would certainly grow if I didn’t deep clean it every time)

  source
• lemmy_acct_id_8647@lemmy.world ⁨2⁩ ⁨months⁩ ago

  Finally! Been looking for these for a long time that weren’t stupidly overpriced!

  source

  • Tar_alcaran@sh.itjust.works ⁨2⁩ ⁨months⁩ ago

    They’re 30 bucks…

    source

    • stargazingpenguin@lemmy.zip ⁨2⁩ ⁨months⁩ ago

      It’s still a lot of money for a mug, but compared to the $150-$300 they’re selling for on eBay it’s a great deal!

      source
• veeesix@lemmy.ca ⁨2⁩ ⁨months⁩ ago

  The jingle is a nice add-on, though a white-coloured print may have been clearer.

  source

  • ValueSubtracted@startrek.website ⁨2⁩ ⁨months⁩ ago

    It’s interesting that they didn’t bother replicating (heh) the rubber base of the originals. Too many added costs, I suppose.

    source

    • veeesix@lemmy.ca ⁨2⁩ ⁨months⁩ ago

      You’re probably right that the math didn’t add up for them.

      Might be worth getting a pad replacement for the original cup and slapping that on yourself.

      source

      • -> View More Comments
• stargazingpenguin@lemmy.zip ⁨2⁩ ⁨months⁩ ago

  Very tempting! All the other ones I’ve seen are quite expensive.

  source
• The_Picard_Maneuver@lemmy.world ⁨2⁩ ⁨months⁩ ago

  I need this.

  source
• _core@sh.itjust.works ⁨2⁩ ⁨months⁩ ago

  Neat, a mug that looks like a bullhorn

  source