Weight Lifting: How are you supposed to know the weights of unlabled things?

Submitted ⁨⁨8⁩ ⁨months⁩ ago⁩ by ⁨pete_the_cat@lemmy.world⁩ to ⁨[deleted]⁩

I started lifting weights (again) and accurately tracking my progress (I bought a “cheap” workout and weight loss plan, which requires a lot of data so you can see your progress (or regress). When bench pressing and doing squats on the (Cybex) Smith Machine I had assumed that the bar weighed 45 pounds like a free bar does and added it to the total weight. It wasn’t until my most recent session (finished about 30 minutes ago) that I realized that the bar doesn’t in fact weigh 45 pounds…but weighs anywhere from 7 to 30 pounds, according to what I saw from a quick search. I should have realized that it wasn’t 45 pounds because it felt pretty light. Google says that the average weight tends to be about 15 pounds, but I have no idea.

I was also using the (Cybex) overhead should press machine and saw that the plates past 50 pounds went in 15 pound increments. Then I noticed the additional weight at the top, disabled by a pin. When I lowered it down on to the stack there was no number on it. Was it 5 pounds? 7.5 pounds? 10 pounds? Who knows?

How are people supposed to know how much weight they’re lifting if things aren’t numbered properly? They have these huge stickers that say everything, but they can’t put “bar weighs 15 lbs” on it?

source

Comments

Sort:hotnew top

Varyk@sh.itjust.works ⁨8⁩ ⁨months⁩ ago
Step on a scale holding whatever you want to weigh.

Put down the thing

Step on a scale not holding the thing you want to weigh.

Subtract the second number from the first.

I realized I didn’t need a special scale to weigh light things if I just did it like that.

source
- Kinglink@lemmy.world ⁨8⁩ ⁨months⁩ ago
  Now lift it up 12 more times. You’ve done a set… do it four more times, move on to the next object.
  
  source
- morphballganon@lemmy.world ⁨8⁩ ⁨months⁩ ago
  This is a great method if you own the object in question… Sounds like OP is curious about equipment at their gym though.
  
  source
  - Varyk@sh.itjust.works ⁨8⁩ ⁨months⁩ ago
    I was under the impression most gyms had a scale, but I have a sample size of one gym that I’ve ever been to, and that gym had a scale.
    
    Maybe that’s not as common as I imagined it was.
    
    source
    -> View More Comments
- howrar@lemmy.ca ⁨8⁩ ⁨months⁩ ago
  OP is looking for the weight of the bar on a smith machine, which means they’ll have to take the scale with them to the machine. That’s definitely not going to fly in most gyms.
  
  source
- Tippon@lemmy.dbzer0.com ⁨8⁩ ⁨months⁩ ago
  Or, just put the thing on the scale?
  
  source
  - Varyk@sh.itjust.works ⁨8⁩ ⁨months⁩ ago
    Many scales won’t register low weights, that’s what this method is for.
    
    source
ShepherdPie@midwest.social ⁨8⁩ ⁨months⁩ ago
If you’re planning on using the same machine continually, you could instead track your progress rather than specific weights. Knowing that last time you lifted 3x weight and this time it’s 4x weight, you can still tell that you’re getting stronger.

source
Kinglink@lemmy.world ⁨8⁩ ⁨months⁩ ago
Using the same bar every time, it’s the same weight, you don’t need to know what’s on it. Olympic bars (and most bars) are 45, so I just use that.

But let me give you another idea. WHO CARES? Yeah I know we all like to track progress when weight lifting, but at the end of the day did you lift the weight and bring it back down? Did you do it multiple times? Did you do it to exhaustion? Great, you’ll grow. If you truly care then ask "When I used that same machine could I do it with more weight? Could I do more reps with the same weight? The machine itself doesn’t change so just use that specific type of machine as the metric.

I’ve found weight machines are NOT comparable to Free Weights, Which are not comparable to even smith Machines… So ultimately… Compare apples to apples.

source
- THE_ANTIHERO@lemmy.today ⁨8⁩ ⁨months⁩ ago
  Some people do need to track it and it has its own benefits like changing diet,sleep etc. according to it.
  
  source
  - mipadaitu@lemmy.world ⁨8⁩ ⁨months⁩ ago
    True, but as @Klinglink said, unless you are competing, you only really need to know trends. So knowing you lifted 100kg isn’t as important as knowing you lifted 10kg more (or less) than last week.
    
    source
- pete_the_cat@lemmy.world ⁨8⁩ ⁨months⁩ ago
  I’ve definitely noticed that there isn’t a correlation between free weights and the machines. Doing an Overhead Dumbbell Shoulder Press I was struggling at 20 pounds after about 9 reps, but with the Shoulder Press machine I had no problem doing 50 pounds.
  
  source
  - Kinglink@lemmy.world ⁨8⁩ ⁨months⁩ ago
    A big part is always going to be stabilization, when you’re using the machines you don’t need to focus on those muscles, so I usually recommend people doing free weights. It’s a similar story to doing chest flies. But the big benefit of the machines is they’re designed to conform to the “optimal” range of motion, and somewhat less chance of injury
    
    source
    -> View More Comments
MissJinx@lemmy.world ⁨8⁩ ⁨months⁩ ago
Use the “too heavy” method. If it’s too heavy for you try another one

source
InformalTrifle@lemmy.world ⁨8⁩ ⁨months⁩ ago
Why do you need to know? Just track the weights you put on, ignore the bar/machine

source
- fastandcurious@lemmy.world ⁨8⁩ ⁨months⁩ ago
  I do just this lol, Bar+30kg
  
  source
howrar@lemmy.ca ⁨8⁩ ⁨months⁩ ago

I was also using the (Cybex) overhead should press machine and saw that the plates past 50 pounds went in 15 pound increments. Then I noticed the additional weight at the top, disabled by a pin. When I lowered it down on to the stack there was no number on it. Was it 5 pounds? 7.5 pounds? 10 pounds? Who knows?

A trick for these machines if you want to add weight in smaller increments and also know the weight you’re adding is to place a small plate on the pin (On the yellow pin in the image below). It would look something like the second image below. You can do that instead of using the unlabelled weight on the stack.

Image

Image

And as many others have already said, the actual number doesn’t matter much. If you go from one machine to another, even if it’s the same brand and same model, the same weight is going to give different resistances. The part that matters is that you progress. You know that if you add weight on the smith machine, then you’re moving more weight. If you enable the small weight on the shoulder press machine’s weight stack, then it’s more weight than not having it enabled, but less than moving the pin down the stack.

source
- pete_the_cat@lemmy.world ⁨8⁩ ⁨months⁩ ago
  Thanks! I’ve seen people do that, and I did it as well on the Lat Press machine but couldn’t do it with the Shoulder Press machine since the stack is enclosed in a shroud 😑
  
  I figured progress at any rate is what really matters.
  
  source
- litchralee@sh.itjust.works ⁨8⁩ ⁨months⁩ ago
  For people that are interested in the plate-bearing pin, you might find that they’re kinda expensive. However, it is something which can be constructed fairly simply, using wood and a threaded rod plus hardware. Fractional plates would usually top out at 5 kg or 15 lbs, so it doesn’t need to be made out of billeted titanium or whatever.
  
  functional trainer weight stack, with a wooden pin inserted which can accept 50 mm fractional plates
  
  This is one such wooden pin I made, using a scrap 4x4 block of wood and a router. If for your homegym equipment, you may be able to permanently mount a peg for plates, which I’ve done for my functional trainer.
  
  functional trainer weight stack, showing a permanently-secured, double-sided peg that accepts fractional plates
  
  source
  - pete_the_cat@lemmy.world ⁨8⁩ ⁨months⁩ ago
    Thanks, but I live in an apartment complex so I don’t have access to any tools or space to do it in haha
    
    source
EssentialNPC@lemmy.world ⁨8⁩ ⁨months⁩ ago
First, I am sorry for everyone just finding this question. There are many valid reasons for wanting to know the unloaded weight of machines, including just being curious. If you want to change up your routine or compare results between machines, you absolutely want this info.

Some machines will have this information in fine print on the main instruction panel or some small label on the machine. You have to search for it.

The most reliable way to know would be to ask the staff at your gym. A gym-employed trainer would be a great resource if they are off without a client. At my gym, I just put in a request that they level all of the machines with this info. It seems like a big quality of life increase for the cost of some printer paper and packing tape.

Keep lifting heavy and pushing for the details you want. I know on my leg press sled, I absolutely want credit for the 105 lb. sled in addition to the plates I put on it.

source
- howrar@lemmy.ca ⁨8⁩ ⁨months⁩ ago
  Curiosity would be the only valid reason for knowing. You can’t compare between machines, even if they’re the same model.
  
  source
  - EssentialNPC@lemmy.world ⁨8⁩ ⁨months⁩ ago
    I would mildly disagree. Knowing your numbers for a lift can help you estimate where you should be on related lifts. It can also help you very roughly gauge your progress compared to others. The mechanical advantage, friction, and other physical aspects of any given machine play a huge role for sure, but one can broadly make comparisons.
    
    source
    -> View More Comments
- pete_the_cat@lemmy.world ⁨8⁩ ⁨months⁩ ago
  Thanks, the gym I go to is in my apartment complex so there’s no staff to ask, I tend to just search Google for the answers.
  
  I switched from doing weighted step-ups to a single leg press on the machine and was like “Holy fuck this is hard” and then saw that the sled weighed over a hundred pounds.
  
  source
- litchralee@sh.itjust.works ⁨8⁩ ⁨months⁩ ago
  I agree with wanting to know the empty weight for machines. For my leg press at home, I forgot to weigh the sled/carriage before fully assembling the machine. So I did the next best, which was to measure the uphill force of the carriage at its 45 degrees, using a cable that pulls uphill and dangles vertically off the top of the machine. I then progressively loaded the cable with plates until it started to move the carriage.
  
  The force uphill is sqrt(2) of the carriage weight, so I multiply the plates by 1.41 to arrive at the empty weight. This is only useful when I compare to the leg press at the office gym, though.
  
  source
  - EssentialNPC@lemmy.world ⁨8⁩ ⁨months⁩ ago
    That is some ingenuity! Smart move.
    
    I am lucky that I have been working with a trainer for a couple years, and she knows this info for every piece of equipment in my gym. It will get harder as I taper off working with her.
    
    source
Kecessa@sh.itjust.works ⁨8⁩ ⁨months⁩ ago
On the Smith machine > track only the weights you add to it

On the other machine > It’s either 2 x 5 lbs or a single 7.5lbs, so you have a middle step/two steps before going up another 15lbs with the “regular” weights at the bottom

source
- pete_the_cat@lemmy.world ⁨8⁩ ⁨months⁩ ago
  Thanks!
  
  source
fastandcurious@lemmy.world ⁨8⁩ ⁨months⁩ ago
Unrelated but what kind of ‘plan’ did you buy, you don’t need anything, I have lost all the weight I wanted and didn’t pay a single dime for anything other than gym fees and a protein shake I bought only once when my cut got a bit more aggressive

As for progression, just make a list of exercises with sets and reps on your notes app and then update it every-time you hit the same lift again

If you want one to follow then its fine, but a lot from what I can tell is garbage, the only way to lose muscle is a caloric deficit, if you realize that and how to track your macros you will have a much better time

source
- pete_the_cat@lemmy.world ⁨8⁩ ⁨months⁩ ago
  It’s Built With Science, everything is laid out for you. It takes all the guesswork out of what you should be doing. I’m a computer geek, physical fitness isn’t my area of interest, so it’s nice to have someone be like “Here’s the two sets of exercises that you should be alternating between for the next 3 months, and then switch to these exercises. Track your progress or regress in this spreadsheet we made for you. Proper form and explanation are provided in YouTube videos and Slide sets. Also there’s a spreadsheet to help you Cut and then Bulk.”
  
  It was like $120, and there’s a lot of content.
  
  source
  - fastandcurious@lemmy.world ⁨8⁩ ⁨months⁩ ago
    If you are not interested in weight lifting then ig it can get a little too much
    
    Still Have atleast some fun though!
    
    source
HELLZBELLY@lemmy.world ⁨8⁩ ⁨months⁩ ago
There’s one way I can think of that’ll let you know. You can get a small fish scale that fishermen use. Tie a string or whatever around the bar in the middle to attach the scale and weigh the bar. It should only take a few seconds and you’ll have an answer.

source
- z00s@lemmy.world ⁨8⁩ ⁨months⁩ ago
  My bar weighs 25 bream
  
  source
  - matthewmercury@reddthat.com ⁨8⁩ ⁨months⁩ ago
    That’s a crappie measurement
    
    source
    -> View More Comments
TechAnon@lemm.ee ⁨8⁩ ⁨months⁩ ago
With machines, just remember the “clicks” or “notches” to compare progress. You’ll never really know the real weight because who knows the maintenance on them and the amounts of friction per machine that are inherent let alone the pivot points that allow for leverage that can vary.

source
phdepressed@sh.itjust.works ⁨8⁩ ⁨months⁩ ago
This site has a chart of bar weights for cybex. fitnessvolt.com/smith-machine-bar-weight/#how-muc…

Per a pinned extra weight besides finding your machine info the easy assumption is that they are increments between the most common weights. So on your machine 7.5lb for a single pin weight would be a safe assumption.

source
synapse3252@sh.itjust.works ⁨8⁩ ⁨months⁩ ago
I think you just have to get lucky with being able to find the spec sheet for the exact model you’re working with. Otherwise 🤷

source
- MrZee@lemm.ee ⁨8⁩ ⁨months⁩ ago
  Or use a scale.
  
  source