Simple solution to avoid paying those outrageous Apple prices for charging cords

Comments

• EndlessNightmare@reddthat.com ⁨7⁩ ⁨minutes⁩ ago

  Replacing that with the cost of replacing your home.

  source
• Lost_My_Mind@lemmy.world ⁨5⁩ ⁨hours⁩ ago

  Image

  source

  • Mickey7@lemmy.world ⁨4⁩ ⁨hours⁩ ago

    Also a good idea. Why pay for electric or battery operated tools when you can just add a simple adapter to regular ones

    source
• CaptainBasculin@lemmy.dbzer0.com ⁨4⁩ ⁨hours⁩ ago

  Want to have a battery that lasts for infinity? Troll Science has got your back.

  V = I.R

  where V is the voltage(volt), I is current(amphere) and R is resistance (ohm)

  Battery lifespan is calculated with mAh (mili amphere hour), basically ampheres per hour.

  We have already increased voltage to the AC (220 V), but we can go further and decrease the resistance.

  Longer cable = higher resistance Shorter cable = lower resistance

  Place the charging pins directly into the battery without a cable

  No cable = no resistance

  Now, the previously mentioned equation turns into

  220 = I.0

  This results in I becoming infinite. Electricity companies will go bankrupt, AI companies will be jelly. Problem?

  source
• TVA@thebrainbin.org ⁨4⁩ ⁨hours⁩ ago

  Reminds me of the etherkiller

  source
• DonutsRMeh@lemmy.world ⁨3⁩ ⁨hours⁩ ago

  Has anyone tried this? So tempting. Lmao

  source

  • wonderingwanderer@sopuli.xyz ⁨2⁩ ⁨hours⁩ ago

    Please don’t. That plug has no adapter, and it would fry your battery (possibly even make it explode).

    Phone chargers have adapters in them which do two things. They regulate the voltage, and they add resistance which lowers the current (amperage).

    Phone batteries and internal circuitry have precise requirements to function safely and properly. The user manuals might give you the required range, or you can remove the battery and look at it, and it should say somewhere on it.

    The charger adapter should also have its specs listed. The specs must match the requirements of the device and battery, or bad things can happen.

    Fortunately, things tend to be standardized, so most adapters will fall within the range for most devices. But specialized devices might have unique requirements and it’s best to use the adapter they came with. Usually these will have a different type of plug so you can’t mess it up, but if you’re switching out unofficial chargers with different devices then it’s always best to check if they’re compatible.

    The thing in the picture connects the charger cable directly into the outlet. This could blow up your phone or start an electrical fire. At a minimum it will fry your semiconductors.

    It’s possible to wire your own adapters, but you need to know the specific requirements and include the correct voltage regulator and resistors.

    source

    • DonutsRMeh@lemmy.world ⁨2⁩ ⁨hours⁩ ago

      I genuinely appreciate your concern and explanation. It was 100% a joke, friend. No worries. I understand electricity and electronics enough not to do such a dumb thing 😅

      source

      • -> View More Comments