Torx should be the default over Phillips for sure. Phillips is fine for shit like access panels or screw terminals. Slotted is useless for anything but the adjustment on pots and thermostats. Robertson is just a proto-torx. Everything else either exists to make someone money or is a bolt
Comment on I'm just gonna stick to slotted, thanks
Agrivar@lemmy.world 3 months ago
Torx are superior to all other types. I’ve been a carpenter for roughly three decades, and have suffered through all manner of fastening methods that have come and gone. None of them can hold a candle to Torx. I’ve never seen another type that can resist stripping out so well and for so long.
ThrowawaySobriquet@lemmy.world 3 months ago
altima_neo@lemmy.zip 3 months ago
Robertson drive tho
KillingTimeItself@lemmy.dbzer0.com 3 months ago
robertsons are tapered, so unless you get a proper positive lock, or they have dirt in them or something, they’re more liable to stripping out. But other than that, they’re great.
Fuckfuckmyfuckingass@lemmy.world 3 months ago
Least favorite for sure.
nickwitha_k@lemmy.sdf.org 3 months ago
Vastly Superior to Philips, which is vastly superior to blade/slotted for anything resembling a power tool.
Thorny_Insight@lemm.ee 3 months ago
Fellow contractor here. Torx or go home. Drywall screws are the only exception I’m willing to make.
Croquette@sh.itjust.works 3 months ago
Where do you buy torx wood screws or torx metal screws?
I’ve never seen any.
Thorny_Insight@lemm.ee 3 months ago
Most screws sold around here have a torx head
currycourier@lemmy.world 3 months ago
IIRC Spax and GRK make torx multi-purpose fasteners that you can use for wood and metal
Leviathan@lemmy.world 3 months ago
Robertson is superior to all.
uis@lemm.ee 3 months ago
What about hexes?
saltesc@lemmy.world 3 months ago
And a set of Allen keys usually saves a trip to the hardware store if you’re missing the right size Torx bit.
uis@lemm.ee 3 months ago
Hexes save trip to store when you need torx? How?
hydrospanner@lemmy.world 3 months ago
Because a hex key can fit (albeit imperfectly) into a Torx opening and loosen or tighten the fastener as needed.
It’s more likely to slip or strip, but it’s better than nothing.
nickwitha_k@lemmy.sdf.org 3 months ago
The opposite is also true.
Aux@lemmy.world 3 months ago
Torx can’t hold shit. They’re single use screws.
JustAnotherRando@lemmy.world 3 months ago
How do you feel about square drive? I’m no carpenter, just someone that’s done enough work around the house, but I’ve found that Torx are the best option but square is a close second (but I don’t think I’ve used them in any especially high torque situations, and they may fall short there).
Agrivar@lemmy.world 3 months ago
Square drive (or Robertson) I consider a close second. They do tend to strip out faster, especially in “softer” fasteners like stainless steel.
thawed_caveman@lemmy.world 3 months ago
So square is a close second in terms of quality, while being vastly simpler and cheaper to manufacture. Seems to me like i’d prefer square.
Also i’d be terrified of getting dirt in a torx screw, good luck cleaning it to make it usable again. Though i haven’t actually had this problem personally so it’s just a hunch
Agrivar@lemmy.world 3 months ago
You clearly have no idea how fasteners are manufactured… and you worry needlessly about hypotheticals.
Betty_Boopie@lemmy.world 3 months ago
I have torx all over my mountain bike that gets caked in dirt, a little bit of water and a pick gets them usable in seconds. I could argue that hex is superior to square but they’re both worse than torx so who really cares.
nickwitha_k@lemmy.sdf.org 3 months ago
Torx, hex, and square/Robertson all require broaching, generally with a rotary broach. The manufacturing process is basically identical, though the manufacturing of the machine tools varies slightly.
John_McMurray@lemmy.world 3 months ago
Square and Robertson are different. No taper in square