November

Comments

• GrymEdm@lemmy.world ⁨1⁩ ⁨year⁩ ago

  Finally a voice of reason - I don’t know who the psychos are who give up screwing for a whole month, but I have things to fasten.

  source

  • SoGrumpy@lemmy.ml ⁨1⁩ ⁨year⁩ ago

    You don’t need to screw to nut.

    source

    • GrymEdm@lemmy.world ⁨1⁩ ⁨year⁩ ago

      In a pinch you can just crank on it until you’re satisfied.

      source
  • puchaczyk@lemmy.blahaj.zone ⁨1⁩ ⁨year⁩ ago

    I’m screwing up my life everyday.

    source
• davidagain@lemmy.world ⁨1⁩ ⁨year⁩ ago

  That’s 16 nuts in a 30 day month. It’s not no nut November and it’s not non stop nut November, it’s intermittent nut November.

  source

  • davidagain@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Or, if you prefer,

    No nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, nut, no nut, Nut, Nut, NUT.

    source

    • ilovededyoupiggy@sh.itjust.works ⁨1⁩ ⁨year⁩ ago

      Sometimes you feel like a nut, sometimes you don’t.

      source
• phant@lemmy.world ⁨1⁩ ⁨year⁩ ago

  Tee Nuts are annoying coz there are also T Nuts, which are used in aluminium extrusion channels. And there’s also Tea Nuts which are nuts you put in tea if you are low on iron.

  source

  • ObviouslyNotBanana@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Tee-hee nuts are better tbh

    source
• Limonene@lemmy.world ⁨1⁩ ⁨year⁩ ago

  Any regular hex nut works just fine as a jam nut. Basically, a jam nut is when you jam two nuts together. (It is gay, because the nuts do touch.)

  And note that those nylon inserts kinda only work once. The bolt carves a thread into the insert when you insert it, so it will be weaker the second time you insert it.

  Honorable mention: cage nuts. A square nut, permanently attached to a fastener that can snap into a special square hole in a 19 inch server rack. When you tighten the bolt against the nut, it tightens against the fastener, so that the nut, bolt, and fastener are secure against the square hole.

  source

  • Track_Shovel@slrpnk.net ⁨1⁩ ⁨year⁩ ago

    I hate nylocks. They are such a bitch to work with in my experience

    source

    • bobs_monkey@lemm.ee ⁨1⁩ ⁨year⁩ ago

      How so? I use the hell out of them, they’re much nicer than using a lock washer

      source

      • -> View More Comments
• Know_not_Scotty_does@lemmy.world ⁨1⁩ ⁨year⁩ ago

  Don’t forget [www.mcmaster.com/products/sex-nuts/](sex nuts).

  source
• shekau@lemmy.today ⁨1⁩ ⁨year⁩ ago

  I already lost NNN 🥺🥺

  source

  • felykiosa@sh.itjust.works ⁨1⁩ ⁨year⁩ ago

    Last year I lost the 29 November 😔😔

    source
• FollyDolly@lemmy.world ⁨1⁩ ⁨year⁩ ago

  If we could all stop using wrenches on the wing nut wings and snapping them off that would be great. Either get the wing nuts with the wrench base or hand tighten only!

  source
• MonkderVierte@lemmy.ml ⁨1⁩ ⁨year⁩ ago

  I’ve seen the upper 2/3 in actual use. The square is ancient.

  source

  • Aqarius@lemmy.world ⁨1⁩ ⁨year⁩ ago

    And still in use in server racks, though not as originally designed.

    source
• SurfinBird@lemmy.ca ⁨1⁩ ⁨year⁩ ago

  Wow I never knew no nuts like I know nuts now!

  source
• kamen@lemmy.world ⁨1⁩ ⁨year⁩ ago

  This fella is nuts.

  source