Comment on Hedonic Threadmill

MML@sh.itjust.works ⁨3⁩ ⁨days⁩ ago

• CelloMike@lemmy.world ⁨3⁩ ⁨days⁩ ago

  You can also use a tap as a lathe threading tool if it’s got the tooth spacing you want, and the diameter is bigger than any of the dies you have

  Real machinists will be sad with you if you do this

  source
• hOrni@lemmy.world ⁨3⁩ ⁨days⁩ ago

  It’s a thread mill, not a tap, the grooves are horizontal. It technically is possible to cut an external thread with a tap.

  source

  • danekrae@lemmy.world ⁨3⁩ ⁨days⁩ ago

    I once made worm gears using a M10x1 tap in a manual lathe.

    source

    • turdburglar@piefed.social ⁨3⁩ ⁨days⁩ ago

      i once made a worm bin using box joints in spruce

      source
  • MML@sh.itjust.works ⁨3⁩ ⁨days⁩ ago

    Well TIL, not a machinist so I’ve only ever really used taps and dies.

    source

    • hOrni@lemmy.world ⁨3⁩ ⁨days⁩ ago

      I am, and I really can add anything to the conversation, so thanks for the opportunity.

      source

      • usualsuspect191@lemmy.ca ⁨3⁩ ⁨days⁩ ago

        Can you add a chamfer?

        source
      • JasonDJ@lemmy.zip ⁨3⁩ ⁨days⁩ ago

        What can you add to my engine to increase the displacement?

        source
• Wilzax@lemmy.world ⁨3⁩ ⁨days⁩ ago

  It’s not, but it looks cool!

  source