Any durable double edged razors at the sub £50 mark?

Submitted ⁨⁨8⁩ ⁨months⁩ ago⁩ by ⁨vext01@lemmy.sdf.org⁩ to ⁨wetshaving@sub.wetshaving.social⁩

Hi wet shave dudes,

I’ve been shaving my head with a DE razor for a few years now. I’ve had a few cheap £20 razors, but they don’t seem to last me very long.

On one the butterfly mecanism broke. My next was a 3 piece, which I dropped and the chrome chipped off. They were both Parker razors.

After some research, seems the way to go for durability is steel, but steel razors (e.g. rockwell 6s) tend to be above £100.

I’m not sure I’d be OK dropping that kind of money, so I wanted to ask: is there a good durable DE around £50?

Some razors are marketed as “tripple chromed”. Are they any better?

Cheers

source

Comments

Sort:hotnew top

Extrasvhx9he@lemmy.today ⁨8⁩ ⁨months⁩ ago
I can swear the RazoRock Game Changer .76-P is like 55usd on Italian barber think that’s around 50£ idk the exact exchange rate. But guess something that comes in anodized aluminum might be another alternative like a lupo or something similar. Think there was also a de89 clone that was made with sturdier materials but for the life of me can’t recall the name

source
- vext01@lemmy.sdf.org ⁨8⁩ ⁨months⁩ ago
  It’s hard to find in the UK. Amazon has a razorock GC, but it’s over £100.
  
  source
  - Extrasvhx9he@lemmy.today ⁨8⁩ ⁨months⁩ ago
    Oof amazon has the worst prices tbh but honestly didn’t Italian barber isn’t available in the UK. Does maggard ship there? If not you might just have to go on eBay and see what you can get
    
    source
- djundjila@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
  The game changer is quite popular, but razorock/Italian Barber has a history of shitty business practices which makes me reluctant to throw money their way. Even if the hawk and the gc are great razors.
  
  source
Jake_Farm@sopuli.xyz ⁨8⁩ ⁨months⁩ ago
I have a hard time believing steel razor handles are more expensive. It is more that luxury brands have luxury prices.

source
- vext01@lemmy.sdf.org ⁨8⁩ ⁨months⁩ ago
  I was thinking this too.
  
  A set of stainless steel cutlery isn’t super expensive for example.
  
  source
  - Jake_Farm@sopuli.xyz ⁨8⁩ ⁨months⁩ ago
    Are you looking for another butterfly mechanism or are you open to any type?
    
    source
    -> View More Comments
- djundjila@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
  It’s just the missing economy of scale, I reckon.
  
  source
vext01@lemmy.sdf.org ⁨8⁩ ⁨months⁩ ago
Has anyone tried the edwin jagger 3one6 series of steel razors?

source
- PorkButtsNTaters666@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
  Haven’t tried it, but only heard good things about it.
  
  source
- djundjila@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
  I haven’t tried the 3one6, but it has supposedly the same geometry as the Mühle Rocca, which is a great razor.
  
  source
walden@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
I really like the Fatip Gentile. It’s on the medium side of mild, so I assume it might be good for head shaving? I still get very close shaves from it despite not having a lot of blade feel. Nice efficiency.

As @djundjila@sub.wetshaving.social mentioned, Fatip razors are made from brass, so even if the chrome chips off (I do suggest chrome as it’s more durable than nickle or gold) it won’t be bothered by water.

The only downside to Fatip is the blade might need to be manually aligned before you tighten everything down. It doesn’t bother me at all, but might bother you.

Another option is a RazoRock Game Changer, which actually seems to be in stock right now. Hmmm, I might actually grab one.

source
- vext01@lemmy.sdf.org ⁨8⁩ ⁨months⁩ ago
  I’m starting to think that a brass chromed razor is the way to go. Edwin Jagger DE89 is cheap and replacement heads can be bought cheaply in the UK too.
  
  Maybe later in life, a stainless razor.
  
  source
  - HomeAwayFromHone@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
    You might also consider vintage razors, a lot of them are brass and they’ve stood the test of time to get this far.
    
    Alternatively, if what you really want is machined stainless you can probably get it for that price from dscosmetic or yaqi on AliExpress. They have many models so it’d be worth searching out some reviews.
    
    source
Pulptastic@midwest.social ⁨8⁩ ⁨months⁩ ago
You can get used Gillette DE for cheap. It may take a bit of labor to get it cleaned up.

source
- JoYo@lemmy.ml ⁨8⁩ ⁨months⁩ ago
  the king gillette isn’t bad for the price if a bit shallow on the attack.
  
  remember when gillette tried to kill safety blades?
  
  source
  - Pulptastic@midwest.social ⁨8⁩ ⁨months⁩ ago
    KCG blades are my favorite! I don’t have any experience with the razor though.
    
    source
    -> View More Comments
djundjila@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
If you want a razor that can survive a drop, then you’ll want to stay away from from the previous two recommendations. They are also chrome plated zamac and won’t fare better than what you’ve tried.

You’re right that stainless steel razors tend to lean expensive. The closest to your budget I can think of is the mühle Rocca , which is a great value IMO, but still pricey.

Brass is another great choice that’s much more durable than chrome plated zamac. You can get brass razors with it without chrome plating and it’s mainly a question of esthetics: chrome plating is shiny (but can chip), unplated brass develops a patina if it isn’t polished which some people like, others don’t.

In brass, you can choose between myriad vintage Gillette Tech razors on eBay (cheap, great razors that will outlive you) or modern brass razors like Fatip which will likewise outlive you and cost you under 20£.

I personally enjoy the Lo Storto Fatip a lot.

Some razors are marketed as “tripple chromed”. Are they any better?

No. The only thing that matters is under the chrome plating. Even if you never drop your razor, at some point you’ll wear through the playing at the threads of the screw post, and the underlying metal will be exposed. If it’s brass, nothing happens. If it’s zamac (potmetal), it’ll corrode and break quickly.

source
- vext01@lemmy.sdf.org ⁨8⁩ ⁨months⁩ ago
  Thank you for the detailed response.
  
  I don’t care much about tarnishing, so maybe brass is the way to go!
  
  source
- vext01@lemmy.sdf.org ⁨8⁩ ⁨months⁩ ago
  I don’t see any unplated fatip razors on their site btw.
  
  source
  - djundjila@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
    Oh yeah, Fatip has chrome or gold plating, I think. But the advantage is that if you drop it and the plating chips, the underlying brass won’t be bothered by it. For unplated brass, you can look at vintage Gillette razors, for instance
    
    source
PorkButtsNTaters666@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
First: the damage of your razor is probably for the moment only cosmetic, but it will start to corode more easily. But you can wait before you buy something else.

Most razors in this price range will be mostly zamac alloy, which you won’t hand down to your great grand-children, but will last for years, if properly taken care of.

Some razors are marketed as “tripple chromed”. Are they any better?

I’m not aware of any difference in chroming; I would take this as marketing speech (It’s toasted!). Which are these?

For good DE razors in the 50£ range, check:

Edwin Jagger

Mühle

Merkur

All of these also have stainless steel razors.

Anyway: if you have a tendency to drop things, more expensive stainless steel or brass razors will also tend to be heavier. They won’t break, but they can deform on impact. And they can chip your sink.
source
- vext01@lemmy.sdf.org ⁨8⁩ ⁨months⁩ ago
  I was looking at EJ. They sell the heads separately, so I could easily replace if I drop.
  
  source
- djundjila@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
  
  stainless steel or brass razors will also tend to be heavier
  
  You think a Gillette tech would chip your sink any more than a zamac parker? They’re not that heavy…
  
  source
  - PorkButtsNTaters666@sub.wetshaving.social ⁨8⁩ ⁨months⁩ ago
    That’s true - on the other hand, it would not go beyond 50£ either 😊
    
    source
Noodle07@lemmy.world ⁨8⁩ ⁨months⁩ ago
I started with a kit from maggard razor and it’s been going great so far, can recommend

source
B_DL@lemmynsfw.com ⁨8⁩ ⁨months⁩ ago
westcoastshaving.com/…/merkur-33c-classic-safety-…

source