Comment on Is 0.3 quarts extra too mich oil in a car?

RightHandOfIkaros@lemmy.world ⁨5⁩ ⁨months⁩ ago

• BleatingZombie@lemmy.world ⁨5⁩ ⁨months⁩ ago

  My wife was a mechanic (lube tech) for a few years. One guy came in after TOPPING OFF his oil with WATER and was complaining that it wasn’t running right

  source

  • RightHandOfIkaros@lemmy.world ⁨5⁩ ⁨months⁩ ago

    Its pretty unusual to have lube techs doing any diagnosis, but did she ask him if he likes chocolate milkshakes? Because That’s exactly what you create when you mix water in engine oil. Just don’t drink it.

    source
• waz@lemmy.world ⁨5⁩ ⁨months⁩ ago

  Having once upon a time overfilled my oil by almost a quart, I think you are mostly right.

  Engine oil should stay in the crankcase. During normal operation, some of it is pumped elsewhere to lubricate the crankshaft, cams, and other mechanical components. The rest of the oil sloshes and splashes around the crankcase keeping everything slippery. If there is too much excess in the crankcase, components moving can push the oil somewhere it shouldn’t be.

  In my case, when turning left, the excess oil was pushed passed the piston rings and burned in a huge cloud of blue smoke. It wasn’t a proud moment, but stopping in a random service station and having Bruce try to drain a quart of oil out of the engine, because I couldn’t afford a full oil change was awkward.

  … Anyway: all of that to say this:

  If you have too little, your oil pressure light will probably come on. If you have too much, you’ll notice it somewhere else.

  source

  • RightHandOfIkaros@lemmy.world ⁨5⁩ ⁨months⁩ ago

    If you find yourself overfilling, or if you are in the business and do heavy line work like I did (engine/transmission replacements and overhauls), just save yourself the time and get a vacuum tank with reservoir. If you overfill something you can pump a bit back out, they make them with pneumatic attachments or with a handpump that looks a bit like a bicycle tire air pump. Shove the little feed tube down the dipstick and pump whatever you need to back out.

    source
• LemmyKnowsBest@lemmy.world ⁨5⁩ ⁨months⁩ ago

  we’re supposed to pour it onto the oil filter too?

  source

  • RightHandOfIkaros@lemmy.world ⁨5⁩ ⁨months⁩ ago

    I mean, you don’t HAVE to. But you can pour some oil into the filter to pre-fill it so the oil doesn’t have to pump so long for the air you cycle out of the system, but the amount of time that happens for is so small it basically doesn’t matter. If the oil filter is easy to access and faces upward (the solid part faces the floor and open part faces up) then I would do it, but I wouldn’t do it in any other circumstance just to not have oil spilling and making a mess everywhere.

    Youre not going to blow up the engine if you don’t. But it gives some people better peace of mind.

    source
  • BeigeAgenda@lemmy.ca ⁨5⁩ ⁨months⁩ ago

    I think it’s easier to fill a little extra after having turned on the engine.

    source
  • cyberpunk007@lemmy.ca ⁨5⁩ ⁨months⁩ ago

    I just don’t pil change, it might show a little high, then you run the motor to cycle it through the system then it levels out. Good enough. A little less or extra doesn’t hurt anything.

    source

    • LemmyKnowsBest@lemmy.world ⁨5⁩ ⁨months⁩ ago

      LOL

      source