greyfox
@greyfox@lemmy.world
- Comment on How come LED Light Bulbs only last for about 2-3 Years? 1 month ago:
I’ve got several full color Hue bulbs that are the most used lights in my house. I haven’t had a single failure in a decade.
I was more than a little annoyed when they decided to stop supporting my original controller for them though.
- Comment on It will outlive us all 3 months ago:
We asked our Dell sales guy this question years ago now, when they had been removed one year and quickly added back the next year.
They are there mostly for government builds, and other places with high security requirements. Usually the requirement is that they need to prevent any unauthorized USB devices from being plugged in. With the PS2 m&k ports they can disable the USB ports entirely in the BIOS.
- Comment on Cant play monster hunter 10 months ago:
I recently bought a used switch from eBay which didn’t come with Joy-Cons as a gift for someone else. Took my OLED’s Joy-Cons and popped them on to test while I was waiting for the new Joy-Cons to arrive…
Well little did I know there was something sticky that had gotten on the contacts of this used switch, which then transferred to the Joy-Cons. I of course plugged them back into my OLED trying to figure out what was going on and transferred enough of whatever it was to my OLED to start causing problems as well.
Long story short it doesn’t take much to break that contact.
If you have an original switch and the right tools to open it up (needs a tri-wing screw driver), it is pretty easy to open it up, remove the contacts from the rail and thoroughly clean them. Worked perfectly to get the used switch back to brand new.
Of course don’t forget to do the same on the contacts of the Joy-Cons They need the same tri-wing screwdriver to open.
The OLED is a bit more of a PITA to get the rails out, so if you have an OLED or don’t have the tools to open your original you can make a makeshift cleaner like this person did (sorry about the reddit link). Joy-Con Rail Contact Cleaning Tool
I used a much smaller cable tie so that I could fit some isopropyl dipped gauze around the tip to get into the contacts (power off your switch entirely first!!!).
Careful on the Joy-Cons if you try to use something like that tool. The Joy-Cons are the spring side of the contact so you could easily bend them and make things worse.
If you have problems with stick drift and feel comfortable opening them up, you can get replacement sticks on eBay for $5-6 a piece.