Comment on Scales that refuse to measure if the battery isn't brand new
magikmw@lemm.ee 2 weeks agoExcept the cheap part. But likely not by much.
Comment on Scales that refuse to measure if the battery isn't brand new
magikmw@lemm.ee 2 weeks agoExcept the cheap part. But likely not by much.
chonglibloodsport@lemmy.world 2 weeks ago
You can order 3000 3.3V low drop out (LDO) voltage regulators on LCSC for $25.50. That’s less than a penny each.
Ghoelian@lemmy.dbzer0.com 2 weeks ago
Yeah, but it’s more than 0 pennies each.
B0rax@feddit.org 2 weeks ago
Doesn’t help when you need 3.3V and the batteries are now down to 2.5V they are not putting a boost converter in there.
chonglibloodsport@lemmy.world 2 weeks ago
Right. If your design requires 3.3V minimum then putting in a 3.3V battery and no boost converter is just dumb (or extremely user-hostile).
itsmect@monero.town 2 weeks ago
Batteries have one advantage over over supplies: extremely low noise. Even an good LDO will bump up the noise floor, and a cheap lcsc part will do so too. Plus you’s want a reasonably low dropout and quiescent current, which also increases price. Maybe 10ct in volume is reasonable for such a part - and yes, that will absolutely eat the margin
chonglibloodsport@lemmy.world 2 weeks ago
That’s definitely true. But I would definitely pay more for a scale with ultra long battery life.
I made the mistake of buying an off brand digital calliper and now like an idiot I find myself removing the battery when it’s not in use just to avoid damn thing running flat in one month thanks to its atrocious standby current which enables the display to turn on instantly when I move the slide (rendering the on/off entirely moot).
TheOakTree@lemm.ee 2 weeks ago
Same story here. You described it perfectly. Mitutoyo comes next.
Juvyn00b@lemmy.world 2 weeks ago
Lol I must have one similar. Burned through a battery in storage and when I replaced it, I noticed that the display is still active even when off - such a weird design. I pop the battery half out for storage every time now.
tibi@lemmy.world 2 weeks ago
The problem would be solved if these scales would take a AAA battery which has a lot more capacity than a tiny cell.
itsmect@monero.town 2 weeks ago
I find spending a bit more on batteries goes along way. Although the nominal voltage and size may be the same, better batteries have lower internal resistance, ie provide the same current with less voltage sag. This prevent the low bat detection from tripping prematurely.