Welcome to the WetShaving Lemmy community! This is the place to ask beginner and simple questions. Some examples include:
- Soap, scent, or gear recommendations
- Favorite scents, bases, etc
- Where to buy certain items
- Identification of a razor you just bought
- Troubleshooting shaving issues such as cuts, poor lather, and technique
Please note these are examples and any questions for the sub should be posted here.
Don’t forget out about our wiki! Find it here.
PorkButtsNTaters666@sub.wetshaving.social 1 year ago
Reposting, because I managed to get the original at the very end of last week’s question thread:
I aquired two stones from a Chinese stone brand, Proyan, a 1k and a 6k. I had heard good things about the brand, so I wanted to give it a try. I spent about half an hour on the 1k, and both djundjila’s Styropor beans and a cherry tomato are completely unimpressed by the edge. I am wondering if I suck completely at honing (definitely a possibility), or whether maybe the stone does not have the granulometry it is supposed to have.
The stone feels smooth to the touch (but that may be because my fingers spend too much time honing: Edit: today I feel some structure). I only have a Shapton 12k and the other Proyan to compare (which feels less smooth IMO). How should a 1k synthetic stone feel? Or how could I find out whether it is indeed a 1k or not?
gcgallant@sub.wetshaving.social 1 year ago
I suggest you make sure the stone is flat, start with a thin slurry on the stone, and use the sharpie trick to see where you are, and aren’t, abrading metal.
PorkButtsNTaters666@sub.wetshaving.social 1 year ago
Thanks! I’ll try again, and keep you posted!
djundjila@sub.wetshaving.social 1 year ago
I’m not an expert on this question at all, but I think it’s worth mentioning that the 3k and the 10k sides of my naniwa combination stone feel the same. You wouldn’t easily know which is which by touch alone.
You feel a big difference when honing, though, and the coarser stone produces black steel particles (unsurprisingly) much more quickly.
This doesn’t feel right. I don’t think you should need more than 3 to 5 minutes on the coarse stone to feel a big difference, if the geometry is right. Are you sure your some is reaching the apex of the blade? Maybe the previous honer set the bevel with a tape over the spine?
PorkButtsNTaters666@sub.wetshaving.social 1 year ago
I was the previous honer on a 12k Shapton, and I used a tape. I used also a tape on the 1k. I got abrasion, but it wasn’t black, rather gray.