Comment on my idiot friend printed parts of my 3d printed gun experiment with pla instead of abs
hendrik@palaver.p3x.de 5 weeks ago
And you're absolutely sure it had turned out differently with ABS? I've tried different filaments and to me it seems they're all just plastics... I tried some mechanical parts and they all broke. So I'd say it's likely an ABS gun will explode, too. Don't try that with your other hand!
random@lemmy.blahaj.zone 5 weeks ago
I belive an abs gun should be able to fire 2-3 shots, also it’d probably crack instead of explode (according to people who tried it that is)
hendrik@palaver.p3x.de 5 weeks ago
I really can't tell if you're being serious. I strongly suspect this is some rage-bait or excercise in creative writing... In case it isn't: I'd advise you to re-watch the old Mythbusters episodes. See how they do experiments and treat safety and dangerous things. You generally also don't look down the barrel of a loaded gun. Sure, it isn't supposed to go off and blow your head off until someone also pulls the trigger... But: This is how accidents work. It's literally the definition of it.
And you're constantly begging for more accidents to happen. Your friend wasn't supposed to print it in PLA... That ABS wasn't supposed to do more than crack... The design should have worked...
And then you do the experiments and find out what happens in reality. That's the scientific approach. Your friend didn't use PLA, layer decoherence is a thing and ABS will exhibit catastrophic failire on first try and not just crackle. The whole design might be a failure. I applaud you for learning things... But don't have your fingers and limbs in-between you and that learning experience! Idk, clamp it down with a vise and use a rope to pull the trigger. Watch the Youtube videos of lots of other 3d printed guns explode... Hide behind the shed so the fragments won't hit your eyes.
And in case this is some creative writing project: I'd recommend you to visit 4chan. That's more a place for people like you.
random@lemmy.blahaj.zone 5 weeks ago
nah, this is fr and I DID learn out of this experience, I just wanted to share it, so everyone can be reminded how important safety is
hendrik@palaver.p3x.de 5 weeks ago
Fair enough. Take care. Glad you learned something. That's the most important bit. I was a bit wary at first. It's too easy (generally) to just blame someone else, not learn and repeat the same mistake. And I wasn't sure if you were doing this. The only correct approach is to instead have a good look at ourselves and ask: "What could I have done differently, to prevent a situation like that from happening (or escalating)."
When doing experiments and handling dangerous stuff, it is of utmost importance to factor in mistakes and even unlikely scenarios. You always need more than one layer of protection/safety.
Stay safe, and a speedy recovery.