Comment on acceptable screws
ForgotAboutDre@lemmy.world 8 months agoPosidrive is very common in the UK. Especially in trades. They are so common screwdriver sets will include posi and slotted with no Philips. Philips is still common in electronics.
Posidrive is much better than Phillips, but just as easy to quickly screw lots of things. Torx and hex take longer to align and have many more sized drive ends. Posidrive has three sizes and 90% of them are number 2. But if you need more torque then they are no good. But at that point you need to switch to a different tool like an impact or wrench.
A washing machine I recently had to repair had three different sizes of torx and it isn’t obvious which one till you test fit. Posidrive is easy to identify the size by eye and many different screw diameters share the same posi head. Coupled with self alignment they are just more convenient. I have Robertson bits from multipacks but never needed them.
captain_aggravated@sh.itjust.works 8 months ago
Phillips has been such a standard for so long in the United States I don’t think it’s going anywhere, and Pozidriv has made basically no inroads; in fact the only Posidriv screws I own are part of an E3D 3D printer extruder.
I encounter a LOT of Phillips heads, quite a lot of Torx, at least here in America a lot of carpentry screws are starting to standardize on T25 Torx drive. A lot of them include a T25 driver bit in the package, and they are SO much better than Phillips. Drywall screws are still commonly #2 Phillips. Pocket screws (washer headed wood screws) tend to be square drive for whatever reason. Machine screws are either Phillips or Allen. I find a lot of appliances held together with small external hex sheet metal screws, if not Phillips.
I bought a 50 piece bit kit and it came with no less than 8 #2 Phillips drivers.