Help with Meshtastic on a LILYGO LoRa32

Submitted ⁨⁨16⁩ ⁨hours⁩ ago⁩ by ⁨early_riser@lemmy.radio⁩ to ⁨amateur_radio@lemmy.radio⁩

https://lemmy.radio/pictrs/image/3e393b1b-fd28-430b-a270-4c5a60239a21.jpeg

Bought a pair of these on Amazon (Store page) with the intention to install Meshtastic on them. One of the reviews suggested that the correct firmware to install was the Lilygo T-Lora V2.1_1.6, so I used the web flasher to install it.

I’ve gotten as far as the screen above, but there’s no select button. There are two controls, a momentary switch labelled RST on the store page, and an on/off switch. The on/off switch doesn’t seem to do anything at the moment, and the RST switch just reboots the device.

Is it looking for something connected to a particular GPIO pin?

source

Comments

Sort:hotnew top

Link@rentadrunk.org ⁨14⁩ ⁨hours⁩ ago
Download the app on your phone and configure it through the app using Bluetooth.

source
- early_riser@lemmy.radio ⁨14⁩ ⁨hours⁩ ago
  This seems to have worked thank you.
  
  source
linuxguy@lemmy.gregw.us ⁨15⁩ ⁨hours⁩ ago
Did you try a press and hold / longer press on the button that doesn’t do anything?

source
- early_riser@lemmy.radio ⁨14⁩ ⁨hours⁩ ago
  I’ve tried holding the RST button but it does the same as a quick press. The on/off switch can’t be held.
  
  source