Comment on lightbulbs
Fedizen@lemmy.world 7 hours agoIt seemed odd the lower frequency diodes would be less efficient so I did a quick bit of reading and it seems like red light is efficient, but red and blue light aren’t as effectively picked up by the human eye as green and because each light has a different operating voltage there are some consequences.
From what I read the things that makes white lights more effiecient is they only use blue diodes which probably means less circuitry is needed to operate two sets of alternating diodes and there’s less difficulties going from higher frequency (aka higher energy) to low via filters. Hence efficient green light, blue light and red light.
Aceticon@lemmy.dbzer0.com 6 hours ago
From what I read last time I properly looked into this (so, almost a decade ago when I was considering setting up a business importing LED lamps), the blue light emitting diode junction simply uses less power to emit the same amount of light.
Electrically speaking it’s no bigger or lesser a problem in terms of circuitry to have just blue diodes or blue + red diodes in there since they’re bundled in blocks of diodes in series (and then multiple blocks are in parallel) and the only thing that differs between those two kinds of junctions from a circuit point of view is the drop voltage of one kind of diode being different from that of the other (diode junctions done with different dopants have different drop voltages), something you take into account in the design stage when deciding how many LED diodes you use per block or what DC voltage will your 110v/220V AC input be converted to.
More specifically for LED light bulbs, the messy stuff in terms of electronics is the circuitry that converts the 220v/110v AC input into a lower voltage DC suitable for the LEDs whilst limiting the current (as diodes only ability to “limit” current is them burning out from overheating due to too much current), not the actual LEDs.
But I’ll put it even simpler: if the problem was indeed simplicity as you believe, then LED bulbs with only red LEDs would also be very common as they’re simpler than blue+red ones.
Fedizen@lemmy.world 6 hours ago
You can’t easily use a filter to turn red light into blue. Imo if you needed to light a room for a camera or something not the human eye, red seems like it would be effective for that, but given the filter situation and the eye being best at detecting green light it doesn’t make sense to use red as the base color for indoor bulbs.
From what I read, red LEDs were most efficient at 1.8v and blue more near 4v. Maybe its trivial to do second voltage line but the filter situation is probably the limiting factor here.